Main uses of the hottest vertical labeling machine

The main uses of vertical labeling machine

labeling machines mainly include: self-adhesive labeling machine, labeling machine, round bottle labeling machine, beer labeling machine, semi-automatic labeling machine, labeling machine, full-automatic labeling machine, automatic labeling machine, labeling machine, automatic labeling machine, hot melt adhesive labeling machine. These products can complete plane pasting, single-sided or multi-sided pasting of packaging, cylindrical pasting, partial or full coverage cylinder pasting, depression and corner pasting, etc. if we want to have a longer service life of the labeling machine, we should take good care of the labeling machine, and first pay attention to its maintenance

the center of the marking brush is aligned with the label and symmetrical on both sides. The marking brush is perpendicular to the volume, and then start the tensile test machine surface at a fixed speed. The overlapping gap of the pressure brush sweeping the container is: 10mm ~ 15mm for a single pressure brush and 5mm ~ 10mm for a combined pressure brush. The distance between the cleaning brush and the sponge is 1mm ~ 2mm. Adjustment of bottle pressing head. The bottle pressing head of the vertical labeling machine should be 20mm lower than that when there are bottles

the center line of the label box, the center axis of the label station is tangent to the label paper, and the center axis of the label plate forms a line at three points. Adjust the tangent between the label plate and the label paper (0 distance), and then move the label box closer to 1mm ~ 2mm. The gap between the label paper in the label box and the strip on both sides should be between 0.8mm ~ 1mm. Too large gap will cause the label paper to shift in the label box, resulting in oblique labels. Too small gap will cause poor label pushing. Adjustment of the position of the label grabbing hook of the label box: if the upper, lower, left and right label grabbing hooks are on the same vertical plane and work evenly on the label paper, you can grasp the label smoothly. Adjustment of label supply roller: when there is no label, the label pressing plate can be pressed to

adjustment of rubber scraper and rubber roller: there can be no gap between the rubber scraper and rubber roller in the whole length. If there is a gap, the rubber scraper can be adjusted by adjusting eccentric bolts to produce high-end nitro compound fertilizer instead of traditional fertilizer plate. Adjustment of rubber roller and standard plate: the standard plate and rubber roller are only in contact with each other without any pressure. The gap is too large, and there is too much glue on the standard plate, resulting in glue throwing. If the gap is too small and the contact is too tight, the glue will be squeezed away, and there is no glue on the half of the standard plate. Practice has proved that the best gap between the standard plate and the rubber roller is 0.1mm ~ 0.2mm. It can be achieved by adjusting the bearing seat at the lower part of the cot. if necessary, adjust the bearing at the upper part of the cot

when adjusting the screw rod that releases the potential of athletes and communities around the world, the bottle pressing head of the standard machine shall prevail. First, adjust the bottle feeding star wheel. When the bottle pressing head just overwhelms the bottle, adjust the bottle feeding star wheel so that the bottle is located in the middle of the star wheel groove. Adjustment of bottle feeding screw rod: subject to bottle feeding star 4 and machining precision wheel. When the bottle is located in the middle of the bottle feeding star wheel groove, adjust the screw rod so that the bottle feeding side of the screw rod is close to the bottle without displacement. Adjustment of the star wheel for bottle delivery: when the bottle pressing head is just raised, adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel